Self-Repair Capability
L3-SLF-EXEC-CTRL CRITICAL COMMAND CONTROL Level 3 · software

Recovery Execution Controller

Step-By-Step Recovery Execution Controller

The Step-By-Step Recovery Execution Controller is a software module stored on radiation-hardened NOR flash that executes contingency procedures across the Lunar Ark system. Operating under L2-SLF-EXEC, it coordinates physical actions through L1-MNT, verifies each sequential step, and executes automated rollbacks upon failure. Long-duration lunar missions demand continuous autonomous execution without real-time intervention, requiring authenticated commands and audit trails. Drawing one watt of power, the controller manages up to four concurrent recoveries across a 100-year operational lifetime with a 500,000-hour mean time between failures.

Step-by-step recovery execution controller executing recovery plans with per-step verification and rollback on failure.

Purpose

Step-by-step recovery execution controller executing recovery plans with per-step verification and rollback on failure.

Context

Child of L2-SLF-EXEC within the Lunar Ark system

Principles

Typical implementations

Lunar considerations

Specifications

Functional

primary functionStep-by-step recovery execution controller executing recovery plans with per-step verification and rollback on failure.
concurrent recoveries4

Physical

mass kg0
materialsCode on rad-hard NOR flash
vacuum compatibilityTrue

Operational

power consumption w1
thermal range c-40, 70
lifetime years100
mtbf hours500000

Interfaces

Provides

Requires

Share

Cite this entry

Lunar Ark Codex. "Recovery Execution Controller" (L3-SLF-EXEC-CTRL). Retrieved 10 September 2026, from https://lunarark.com/entry/L3-SLF-EXEC-CTRL

Licensed CC-BY-SA 4.0. You may reuse and adapt this entry with attribution, under the same licence.

View in the graph Back to the Ark