Preventive Maintenance System
L3-MNT-PROC-VERIFY CRITICAL COMMAND CONTROL Level 3 · software

Procedure Verification

Pre-Execution + Post-Execution Verification

Procedure verification is a software system deployed on radiation-hardened NOR flash that validates engineering procedures before and after execution within the Lunar Ark architecture. Drawing 0.5 watts and processing 50 verifications per day, the routine confirms that tools, replacement parts, and environmental conditions satisfy safety criteria prior to execution, followed by post-task functional verification and incomplete-execution failure analysis. Designed to sustain long-mission safety protocols across a 100-year operating lifetime with a mean time between failures of 500,000 hours, the system generates authenticated audit trails for all maintenance actions.

Pre-execution + post-execution verification confirming procedures are safe to execute and that completion was successful.

Purpose

Pre-execution + post-execution verification confirming procedures are safe to execute and that completion was successful.

Context

Child of L2-MNT-PROC within the Lunar Ark system

Principles

Typical implementations

Lunar considerations

Specifications

Functional

primary functionPre-execution + post-execution verification confirming procedures are safe to execute and that completion was successful.
verifications per day50

Physical

mass kg0
materialsCode on rad-hard NOR flash
vacuum compatibilityTrue

Operational

power consumption w0.5
thermal range c-40, 70
lifetime years100
mtbf hours500000

Interfaces

Provides

Requires

Share

Cite this entry

Lunar Ark Codex. "Procedure Verification" (L3-MNT-PROC-VERIFY). Retrieved 10 September 2026, from https://lunarark.com/entry/L3-MNT-PROC-VERIFY

Licensed CC-BY-SA 4.0. You may reuse and adapt this entry with attribution, under the same licence.

View in the graph Back to the Ark